Connectivity

Panel-mount USB-C keystone coupler

Manufacturer is not stated.

Used in: Little Luggable

Panel-mount Ethernet keystone coupler

Manufacturer and category rating are not stated.

Used in: Little Luggable

Panel-mount USB-A keystone extension

Manufacturer is not stated.

Used in: Little Luggable

Right-angle USB-C adapter

Connector orientation beyond 90 degrees is not stated.

Used in: Little Luggable, Bumble Berry Pi

2.54mm female crimp housing/contact; pin count unspecified

The source does not state pin count.

Used in: Little Luggable, FrameDeck

Right-angle header, two positions; pitch unspecified

Confirm pitch and pin dimensions from the PCB.

Used in: Little Luggable

Compact USB OTG hub with three downstream ports

PiMech links an Amazon unit but does not name a manufacturer. The Adafruit option provides three OTG hub ports plus Ethernet, but is not dimensionally equivalent; match dimensions before printing or modify the retainer.

Used in: PiMech Deck

Dual-band 802.11ac USB Wi-Fi adapter based on Realtek RTL8811AU

The PwnPal source names this exact adapter. A configured specialist-seller product page was not located, so the reputable-seller fallback is a Newark exact-model search.

Used in: The PwnPal

One 2×15 and one 1×15 female through-hole header, 2.54mm pitch

These sockets mate with the A7S GPIO headers. Confirm pin length and pin-1 orientation against the project mechanical datums.

Used in: DC34 A7S Cyberdeck

Two 2×4 female headers plus two 1×1 female headers, 2.54mm pitch

Headers populate the two 8+1 radio sockets; plug-in radio modules are optional and not included in this base manifest.

Used in: DC34 A7S Cyberdeck

Single-row, 14-position female through-hole socket, 2.54mm pitch

Needed only when socketing rather than directly soldering the display; included because the project build guide treats the display as removable.

Used in: DC34 A7S Cyberdeck

One 1×8 and one 1×10 female socket, 2.54mm pitch, mounted 17.78mm apart

The two sockets form the front expansion connector. Confirm alignment against the PCB footprint before soldering.

Used in: DC34 A7S Cyberdeck

Straight 0.1-inch-pitch breakaway header strip

Cut to suit the Pico and prototype-board connections; exact lengths are not specified.

Used in: RadioDeck GQRX Hardware Console

2.54mm female-to-female jumper leads

The source does not specify length or quantity; choose lengths to suit the enclosure layout.

Used in: RadioDeck GQRX Hardware Console, Mu Cyberdeck

USB 2.0 Type-A plug to Micro-B plug cable with data conductors

Use a data-capable cable for the Pico USB CDC connection.

Used in: RadioDeck GQRX Hardware Console

Metal round panel-mount USB 2.0 feed-through connector

The source supplies only a search phrase; confirm connector genders and panel dimensions.

Used in: RadioDeck GQRX Hardware Console

Compact four-port USB 2.0 hub; source listing ASIN B00L2442H0

The Chonky Palmtop wires this hub internally. No trusted tier-1/2 seller for the exact unit was found on the BuildDeck allowlist.

Used in: Chonky Palmtop

Four-port USB 2.0 hub breakout

The source uses this as the internal USB hub.

Used in: Cyberdeck 2026

USB cellular modem compatible with standard Linux network interfaces

The BOM permits SIM7600 or an equivalent USB LTE dongle, so region and carrier compatibility must be confirmed.

Used in: Cyberdeck 2026

SX1262 LoRa radio wing for XIAO; regional frequency variant required

Choose the frequency permitted for the intended operating region.

Used in: Cyberdeck 2026

M.2 wireless module; creator-linked Framework path identifies Intel Wi-Fi 6E AX210 vPro

Confirm keying and antenna-connector compatibility.

Used in: FrameDeck

Laptop-style antenna assembly; connector type, gain and frequency coverage not documented

Creator BOM links Amazon ASIN B08T8F3GDT; do not substitute until connector and mechanical fit are checked.

Used in: FrameDeck

Intel Wi-Fi 6E AX210, non-vPro

Exact module named and linked in the creator BOM.

Used in: Rasti Computer, Framework Cyberdeck

Framework 13 internal Wi-Fi antenna module

Exact Framework antenna module linked in the creator BOM.

Used in: Rasti Computer, Framework Cyberdeck

USB-C multiport hub; exact port requirements not documented

Creator links one example but does not state a model in the BOM.

Used in: Rasti Computer

Two 20-position headers or sockets

Rasti Computer BOM calls for two; confirm pitch and stack height against the PCB.

Used in: Rasti Computer

2.54mm-pitch breakaway header; row count and quantity not stated

Paper Pi README names 2.54mm pins without further dimensions.

Used in: Paper Pi Handheld

Mating precision pin/socket connectors; exact product is unclear

Paper Pi README says “Micro Swiss pins and sockets” but gives no manufacturer, pitch or part number. Confirm mechanically before ordering.

Used in: Paper Pi Handheld

USB Type-C receptacle breakout; exact capabilities not stated

Paper Pi uses a breakout for the charge port; confirm whether only USB 2.0/power pins are required.

Used in: Paper Pi Handheld

Raspberry Pi Meshtastic HAT with E22 LoRa module, GPS and Qwiic connectors

The vecdec v1.1 source names MeshAdv Mini but links only the open hardware repository; verify radio frequency and current availability before ordering.

Used in: vecdec 1.1

915MHz SMA antenna with right-angle joint

The vecdec source allows an antenna with a thumb screw up to 20mm but does not specify a manufacturer or gain.

Used in: vecdec 1.1

RTL2832U-based USB software-defined-radio receiver, V4 revision

The Lambda Cyberdeck 910 essential-parts list names RTL-SDR V4. No trusted tier-1/2 seller on the allowlist was found; verify the exact V4 revision in the marketplace listing.

Used in: Lambda Cyberdeck 910

Panel-mount USB-C receptacle with captive male lead or adapter

The Lambda Cyberdeck 910 essential-parts list requires this for power input but does not identify the exact model or cable length.

Used in: Lambda Cyberdeck 910

Solderable Micro-USB plug/header for custom power and OTG cables

QAZ Cyberdeck requires multiple custom Micro-USB cable ends; the source does not state a manufacturer or package count.

Used in: QAZ Cyberdeck

Solderable USB-C plug/header for a custom power cable

QAZ Cyberdeck uses this for the Amp Ripper power cable; verify VBUS/GND markings and insulate the finished assembly.

Used in: QAZ Cyberdeck

Framework Laptop expansion cards; exact card types and quantities not stated

Framework Cyberdeck creator names Expansion Cards from the Framework marketplace but does not identify the selected ports. No trusted allowlisted Framework seller was found.

Used in: Framework Cyberdeck

Compact USB hub from creator-linked listing B0BLJFZ42M; exact model and port arrangement not stated

Confirm the current listing, host connector, dimensions and port orientation against the enclosure.

Used in: Framework Cyberdeck