Cables & Adapters

Full-size HDMI socket to DIY ribbon-cable connector

Adafruit product 3550; one of the three HDMI cable parts specified for Penkesu.

Used in: Penkesu Computer

Mini-HDMI plug to DIY ribbon-cable connector

Adafruit product 3552; connects the Penkesu display cable to the Pi Zero 2 W.

Used in: Penkesu Computer

20cm flexible ribbon cable for Adafruit DIY HDMI adapters

Adafruit product 3561; the Penkesu source specifies the 20cm length.

Used in: Penkesu Computer

40-pin 0.5mm-pitch FPC extender with 200mm cable

Adafruit product 2098; PiMech routes it through the screen enclosure.

Used in: PiMech Deck

Micro-HDMI male to HDMI female, 90-degree adapter

Stardeck requires a compact right-angle adapter; orientation matters inside the enclosure.

Used in: Stardeck Raspberry Pi Cyberdeck

180-degree USB-C female to Micro-USB male adapter

Required to route power to a Pi 3B+ inside the enclosure.

Used in: Bumble Berry Pi

USB-C cable rated for the selected A7S power source

The source does not specify length or USB power rating. Match the cable to the power bank and A7S power-only port.

Used in: DC34 A7S Cyberdeck, Mu Cyberdeck

Flexible 22AWG silicone-insulated hookup wire

Gauge named in the Chonky Palmtop materials list; exact marketplace pack is ASIN B07T4SYVYG. No trusted tier-1/2 seller for that exact assortment was found.

Used in: Chonky Palmtop

Flexible 18AWG silicone-insulated hookup wire

Gauge named in the Chonky Palmtop materials list; exact marketplace pack is ASIN B073RDBW7L. No trusted tier-1/2 seller for that exact assortment was found.

Used in: Chonky Palmtop

Right-angle micro-USB male-to-female adapter

Brand and connector arrangement are named in the BOM; exact listing is not provided.

Used in: Cyberdeck 2026

USB breakout cable for internal hub connections

The BOM calls for two to three cables and does not identify a single connector variant.

Used in: Cyberdeck 2026

Angled micro-HDMI adapter

The BOM lists this for bench debugging only, not for the final enclosure.

Used in: Cyberdeck 2026

Panel-mounted USB-C extension for charging access

The source does not specify a manufacturer or exact panel cutout.

Used in: Cyberdeck 2026

Assorted wire for I2C, SPI and UART interconnects

Lengths, gauges and connectors remain unspecified in the source.

Used in: Cyberdeck 2026

USB-C to micro-USB charging cable

The BOM lists one for PiSugar charging.

Used in: Cyberdeck 2026

0.1-inch breakaway header pins

The source calls for four to six pins between the Wio-SX1262 and XIAO ESP32-S3.

Used in: Cyberdeck 2026

USB-C video output to HDMI; creator-linked item is Amazon ASIN B083KQNHQH

Creator converted this into a compact right-angle internal cable; an off-the-shelf cable may not fit unchanged.

Used in: FrameDeck

Six-conductor ribbon connection; pitch and connector type unspecified

Connects trackball and keyboard PCB; identify both connectors before ordering.

Used in: FrameDeck

Custom micro-USB power lead terminating in a Dupont-style connector

Supplies display power; polarity, pin count and length are undocumented. Treat as a custom cable.

Used in: FrameDeck

Short USB-C cable; length and connector orientation unspecified

Connects the mainboard to the keyboard controller; verify data support and fit.

Used in: FrameDeck

Approximately 150mm USB-A to USB-C data/power cable

Exact Adafruit product linked in the PX-88 BOM.

Used in: Typeframe PX-88

500mm 15-pin FFC ribbon for Raspberry Pi DSI/camera connector

The PX-88 BOM specifies 500mm and notes that compatible cables may be marketed as camera cables.

Used in: Typeframe PX-88

Two-pin male-to-female JST-PH 2.0 extension, approximately 200mm

Exact marketplace listing linked in the PX-88 BOM; verify conductor polarity rather than relying on wire colors.

Used in: Typeframe PX-88

Approximately 6-inch RF pigtail with U.FL plug and panel-mount SMA female jack

The vecdec source specifies only the connector types and approximate minimum length; confirm compatibility with the radio and antenna.

Used in: vecdec 1.1

90-degree USB-C male-to-female adapter

The vecdec enclosure was designed around the linked adapter; physically similar substitutes may not fit the STL.

Used in: vecdec 1.1

DIY USB-C-to-USB-A leads, panel connectors and four-pin interconnects

The source describes custom internal USB cables and generic connectors but does not fully specify every connector model or quantity.

Used in: vecdec 1.1

Three-position JST-family cable or connector; pitch unspecified

Mu Cyberdeck source calls for a 3-pin JST connector without stating pitch or cable length.

Used in: Mu Cyberdeck

Micro-HDMI male to full-size HDMI male video cable

Lambda Cyberdeck 910 requires one; the creator does not state length or connector orientation.

Used in: Lambda Cyberdeck 910

C1 and A5 connector boards with 5cm flat-flex cable, as specified by the creator

The creator identifies exact connector options from a marketplace listing. No trusted tier-1/2 equivalent was found; check FFC contact orientation before power-up.

Used in: QAZ Cyberdeck

Slim USB-A to 90-degree Apple Lightning charging cable

Exact creator-linked merchant is not allowlisted, so use the marketplace search and confirm connector orientation.

Used in: Framework Cyberdeck

USB-C data/video cable with one 90-degree end; length and rating not stated

Creator links Amazon listing B0BZPSPFV1 for the screen cable. Confirm DisplayPort Alt Mode support, connector orientation and length.

Used in: Framework Cyberdeck

Low-profile right-angle USB connector from creator-linked listing B0BCGH47CN

Connector gender and USB type are not named in the repository; verify the live listing and deck routing.

Used in: Framework Cyberdeck

USB Type-C cable terminating in Mini-USB

Creator links Amazon listing B0744BKDRD; confirm length and data wiring.

Used in: Framework Cyberdeck