Luckfox Pico Plus Cyberdeck

by Tarantado-sys · Intermediate · manifest draft — being verified

A compact serial-terminal deck that pairs a Luckfox Pico Plus Linux board with a Raspberry Pi Pico and a 2-inch ST7789 display. The two boards communicate over UART, with the Pico handling the graphical output.

Tarantado-sys built the LP+ Cyberdeck as a minimal experiment in splitting Linux compute and display duties across two inexpensive boards. The repository publishes the wiring, Pico firmware and Luckfox setup steps even though the project is now unmaintained.

Original: github.com

Parts

Qty	Part	Buy
1×	Luckfox Pico Plus (RV1103) README Hardware Used section names the Luckfox Pico Plus (RV1103).	AliExpress (budget)
1×	Raspberry Pi Pico (RP2040) README Hardware Used and wiring sections name the original Raspberry Pi Pico (RP2040).	Adafruit DigiKey
1×	2.0-inch ST7789 TFT display (GMT020-02-7P) README specifies a 2.0-inch GMT020-02-7P 240×320 ST7789 module; other models require code changes.	AliExpress (budget)

Notes

Official README, wiring and repository license checked on 2026-10-26. Kept as draft because the creator does not identify the power source, enclosure, interconnect wire or any user-input hardware, and exact board/display revisions may affect fit and firmware.

The BuildDeck dispatch

A weekly email of new build manifests and parts deals is coming soon.